Divine 100.33 Piano Black

Available colors
3000 €

Add to cart!

10859   In stock!

Divine 100.33

Divine 100.33 is the new product of this year by XTZ. It is based on the larger model 100.49 and is a good complement like a center and/or surround speaker. Divine 100.33 is a very flexible speaker because of its usage in either vertical or horizontally position. A cradle is of course an attached accessory so you can use the speaker in horizontal position. The speaker works excellent for use as front speakers for those who think the larger Divine 100.49 is a little bit too big. The sound of this speaker is like the larger 100.49 excellent, with XTZ's well-known neutral and detailed sound! 


The cabinet is a solid construction built of thick MDF. The convex design makes the loudspeaker extra stable. The convex sides are also acoustically positive properties and minimize standing waves internally in the case. To get an extra stable cabinet, we have also chosen to use three internal bars for maximum strength and stability. 

Ceramic Tweeter
Ceramic Tweeter

We have chosen an ultra-fast ceramic tweeter, made for reproducing crystal clear sound, even at a high SPL levels without any distortion.

The tweeter is produced by the German company Visaton, and is an absolute reference class unit. It is shielded, with an internally damped cavity and a ventilated voice coil. The tweeter offers an extremely flat frequency response and a low resonance frequency.

Woofer / Midrange Driver

Thiel & Partner, also called Accuton, is one of the most famous manufactures of loudspeaker drivers. XTZ Divine 100.33 uses T & H C173-11-191, a 6,5” driver in the top of the line.

This woofer and midrange driver is in the top of the world and can only be found in extreme High End loudspeakers.

T&P C173-11-191 is a ceramic driver with a light cone, equipped with a neodymium magnet. The driver is extremely stiff and at the same time light, which contributes to the high sensitivity


When XTZ produced the Divine 100.33 a great deal of effort was put into the crossover filter. All passive components are of the highest possible quality to minimize the influence on the signal. For example uses a selection of air wound coils with low internal resistance and MKP capacitors and MOX resistors. 

Room Tuning

Of course the Divine 100.33 is equipped with XTZ’s Room Tuning concept which with simple settings can alter the speaker’s sound character. With the two bass plugs that can be used in the vented holes are the possibilities to obtain three different bass character of the sound. Even the character of the tweeter can be changed in four different modes with the accompanying jumpers. 

Room Tuning
Technical Specification

Type: 2-way speaker, two 7" drivers as woofer / midrange and one 25 mm/1" tweeter. 
Dimensions: 270 x 600 x 400 mm / 10,6 x 23,6 x 15,7 inch (W x H x D) 
Weight: 26,5 kg / 58.4 lb (pcs) 
Impedance: 4-8 ohm 
Nom. impedance: 4 ohm 
Frequency Range: 45 (35) - 25.000 (25.000) Hz - Anechoic (typical room) 
Efficiency: 89 dB 
Crossover frequency: 2000 Hz 
Filter: 2nd order (12 dB /oct) 
Magnetically shielded: No 
Binding post: Gold-plated bi-wiring / Pole screw / Banana plug / Spade (Fork) 
Power: 350 W Short term IEC 268-5, 175 W Long term IEC 268-5 
Tweeter: Visaton ceramic dome tweeter. Magnetically shielded.
Weight 1kg 
Woofer / Midrange: Thiel & Partner C173-11-191 (Accuton).
Weight 2.3 kg